Setenv bootcmd 'run bootcmd_uenv run scan_disk run set_bootargs run bootcmd_exec run bootcmd_lede' Setenv bootcmd_lede 'run set_bootargs_lede ubi part ubi ubi read 0x800000 kernel bootm 0x800000' Setenv set_bootargs_lede 'setenv bootargs console=ttyS0,115200 $mtdparts' With this envs extensions you can upgrade nand only with WIF, but soft reboot works (didnt work with old one)Īnd you have to change the envs only once with the following: Set additional parameters for dualboot LEDE/nand and debian/stick (based on bodhis uboot.2016.05-tld-1 envs) Then from uboot write set the new parametersĢ. It will reformat flash if needed, deal with any bad blocks and so on. To do a sysupgrade as normal with lede-kirkwood-pogo_e02-squashfs-sysupgrade.tar. That file is a LEDE system image that runs from RAM, and you will only use that (atm = _e02.bodhi + )ĭownload, (rename) and place the lede-kirkwood-pogo_e02-initramfs-uImage on the root of a USB flash driveįormatted with FAT32 and insert it in the device Upgrade the Uboot + uboot-envs to most recent bodhi version Note: If you dont have serial console (USB/serial adapter), NC (NetCat) should be configured properly!ġ. You can do this similar with all the kirkwoodplugs using the matching files. How to install LEDE/openwrt on a Pogo E02:
0 kommentar(er)
